Concrete cutting in Fremont CA - straight cuts and a clean site when we leave
Need a section out of a driveway, a trench in a slab or an opening in a wall? We cut it straight and clean up.
- Licensed and fully insured.
- Free estimates at your property.
- We reply within 1 business day.
What does concrete cutting involve on a driveway, floor or wall?
Concrete cutting in Fremont, CA is sawing a straight, controlled line through a driveway, patio, sidewalk, floor or wall with a diamond blade, so you can take out a section, open a trench or make an opening without breaking up the concrete around it.
There's usually a reason behind the call, like a broken piece of driveway, a plumber who needs to get under the floor or a wall that needs a door. The price moves with how long and how deep the cut runs, whether it's flat or up a wall, how much steel is in the concrete and how easy it is to get the saw to it. The schedule mostly turns on any permit and on whether new concrete goes back in afterward. Once I've looked at your job, you get the price and the work in writing.
How do you know when a slab needs cutting instead of patching?
One sunken driveway section
One panel is cracked through, sunk or lifted while the rest of the driveway looks fine. That usually means the dirt under that piece settled or washed out, and the longer it sits, the more water gets under the edges and the further the break spreads.
A line under the floor
A plumber needs to reach a drain or pipe that runs under a garage floor or patio. A sawn trench keeps the rest of the slab whole, while a jackhammer alone tends to crack well past the spot you needed opened, and a leak left waiting softens the ground under the slab.
A wall that needs an opening
You want a doorway or window through a concrete wall, or a bigger one than you have now. A saw gives you a straight, controlled edge, and it's worth calling before other trades get scheduled around the opening, since the planning on a wall takes longer than on a flat cut.
How we handle concrete cutting, start to finish
I look at the surface first, because that decides the saw. Driveways, patios, sidewalks and floors get a walk-behind flat saw with a diamond blade, and a wall gets a saw that runs on a track mounted to the wall. Inside a building, we ask what's in the slab before the first cut, since a pipe or a tensioned cable you can't see is the one thing a saw can't undo. We cut wet on most jobs, with water running over the blade to keep the dust down, and we vacuum up the slurry, the gray mix of water and concrete dust, so it doesn't run to the street drain. Where water isn't practical, like some indoor work near finished floors and walls, we cut dry with a vacuum instead.
A lot of cuts are the first half of a bigger job. A strip taken out of a driveway gets new concrete poured back, and an old patio edge gets cut back so the patio can grow, so we often go straight into concrete driveway building or concrete patio construction. When we do, the new piece gets the same dug-out, packed base as a whole new slab, because the base is the part you can't see on day one and the part that decides whether it cracks.
Get a written price for your concrete cutting job
Send the form and we'll reply within one business day to set a time. I come out, measure the cut and give you a free written estimate, with no pressure and no obligation.
- hello@fremontcaconcrete.com
- Based in
- Fremont, CA 94538
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
What happens when you call us about concrete cutting?
From your side, a cutting job comes down to three steps, and you'll know the price and the plan before any saw starts.
Call or send the form
You call (510) 574-8512 or send the form, and we set a time for me to come out. Tell us where the cut goes, roughly how long it runs and whether it's near the sidewalk or curb.
I measure and price it
I look at the surface, measure the cut and ask what you need it to do. You get a written estimate that spells out the cut, the saw and, when new concrete goes back in, its base, steel and joints, so the price is settled before we start.
We cut, then clean up
We sort out any permit first, and for street work the city's call-ahead adds a couple of business days before we start. Our crew makes the cut with me on site, and we vacuum the slurry and clean up before we leave.
Why Fremont homeowners call Ironset Fremont Concrete for cutting
On a cutting job, the check before the blade touches the slab matters more than the cut itself, so I look at every job myself first. Satisfaction guaranteed on every job. Ask for your estimate or call (510) 574-8512.
The owner measures and stays
I come out to look at the job, and I'm on site while our crew cuts. The person who priced your cut is the one watching the blade, so nothing gets lost between the estimate and the work.
Licensed and fully insured
We're licensed and fully insured, so a saw working next to your house isn't a risk you carry alone. California's Contractors State License Board lists concrete sawing, breaking and coring under its D-6 concrete-related services class, so ask any cutter which license they hold before they start.
In business since 2021
I learned this trade by fixing slabs other people got wrong, and we've been a full business since 2021. That's why I check what's under and inside the concrete before deciding where the saw goes.
Cutting, repouring and street work in Fremont
If your cut touches the sidewalk, curb or gutter, or our trucks have to roll over them to reach the work, the City of Fremont requires an encroachment permit for work in the public right-of-way. With that permit in hand, the city has us call USA Underground Alert two business days before work and call the inspector at least a day before we start. When a job needs a permit, we work with the city and handle the paperwork and the inspections, so you don't have to chase them.
Fremont's stormwater program also requires every construction site to have runoff controls that fit the site and the season, and that matters here because wet cutting makes slurry and most driveways run toward the street. It's the reason we vacuum as we cut. Most of what we cut is driveway and patio slab around homes, and we see the same jobs in Union City and Newark.
Questions about concrete cutting in Fremont
How much does concrete cutting cost in Fremont, CA?
Across the US, professional concrete cutting usually costs about $3 to $10 per linear foot, and that's a national figure for the cutting, not our Fremont price. Where your job falls in that range depends on the cut itself, so I'll measure it and put your price in writing.
Do I need a permit to cut concrete in Fremont?
The city's list doesn't settle it, so check with Fremont's Plans & Permits office before the work starts. Its building permit list names alterations and repairs, additions, demolition and new construction, and concrete cutting isn't on it by name. Work by the sidewalk or curb falls under the encroachment permit covered above.
How do I find out what's inside a concrete slab before cutting it?
Scanning is the usual first step, a non-destructive way to find steel, tensioned cables, empty pockets and other hidden things before a saw or drill goes in. One engineering guide advises against relying on a clear scan alone, and suggests checking the structure and the utilities and getting the work approved first. It calls that especially important in post-tensioned buildings, where cables inside the slab are pulled tight, so if you own one, plan that review before we're scheduled.
Can you cut out just the broken part of my driveway?
Often yes, when the rest of the driveway is sound and only one section has cracked or sunk. We saw a straight line around the bad piece, take it out, rebuild what's under it and pour new concrete that meets the old edge cleanly. If cracks run through most of the driveway, replacing one section usually just moves the problem, and I'll tell you that at the estimate.
What causes a replaced driveway section to crack again?
Usually it's the subgrade, the dirt the slab sits on, left raked level instead of dug out and packed, so it settles and takes the new concrete down with it. Water running under the slab, a pour in midday heat and control joints cut late or skipped cause most of the rest. Control joints are shallow saw cuts that give the slab a straight line to crack along where you choose.
How long does concrete cutting take from start to finish?
The sawing is usually the short part, and the schedule turns on what comes before and after it. Street work waits on the city's permit and call-ahead, a building may need the review described above, and a repoured section needs time to cure and harden before you drive on it.
Related concrete work that often follows a cut
Concrete driveway building
If your driveway is cracked past saving or you want it wider, a new driveway gives you a slab built to drain right and carry your cars.
Concrete patio construction
Cutting back an old patio edge is often the first step to a larger one, poured to drain away from your house instead of toward it.
Service areas for concrete cutting around Fremont
Ironset Fremont Concrete is based in Fremont, CA, and takes cutting jobs in the cities around it, including Hayward and Pleasanton. These 12 cities have their own page, and if yours isn't listed, call and ask.
Fremont, CA
Get your concrete cut measured and priced
Have the surface, where the cut goes, its rough length and any nearby curb or sidewalk in mind when you call, so the first visit covers everything.